Skip to main content
Who can do this: Users with the Manage Job Req Settings permission. The Setup tab only appears for people with this permission.
A job req’s workflow is the path every candidate follows: a series of steps, each holding the activities candidates complete, like screening questions, a typing test or an interview. You build and change it in the workflow editor. Your changes are saved as a draft and only reach candidates when you publish them. For how steps, activities and automation fit together, start with the Workflows overview.

Open the editor

1

Go to the Workflow page

Open the job req and go to Setup, then Workflow.
2

Open the editor

Click Create New Version at the top right. The editor opens full screen.
The Workflow page of the Customer Care Associate job req, showing Workflow 2.0 as the Latest version with its steps and activities, and the Create New Version button at the top right highlighted
If the job req already has a draft, the button reads Edit Draft, or Edit Scheduled Version when a version is scheduled, and the editor opens that version. Otherwise Create New Version starts you from a copy of the live version, and your changes become a new draft when you save. The editor has three columns:
  • Building blocks on the left: a Search box, New Step, and every type of activity you can add, in groups you can collapse. Your saved question templates sit under a collapsed Templates row in their group.
  • The title at the top: the version’s name. Click it to rename the version.
  • The flow in the middle: START, your steps and their activities, then HIRED and REJECTED.
  • Settings on the right for whatever you select in the flow.
The workflow editor: the version name Workflow 3.0 as the title with the job req underneath, and the Review Changes, Exit, Save Draft and Publish buttons at the top. On the left are the building blocks with Search, New Step and collapsed Templates rows. The flow from START through the Screening and Simulation steps is in the middle. On the right are the selected Qualification Questions activity's settings: Estimated Time, Time Limit, the collapsed Instructions and Supporting Content sections and its list of questions.

Add and arrange steps

1

Add the step

Drag New Step from the building blocks into the flow, to where the step belongs. An outlined New Step slot shows where it will land.
New Step being dragged from the building blocks into the flow, with the outlined New Step slot highlighted between the Screening and Simulation steps
2

Name it

Type the name in the step’s name field. Candidates see step names on their progress page, so use names that make sense to them, like “Assessments” or “Interview”.
The new step named Assessment highlighted in the flow between the Screening and Simulation steps, with its automation and trash can icons
3

Put it in order

Drag the step by its handle (the dotted grip to the left of its name) to where it belongs. Candidates move through steps from top to bottom.
To rename a step, click its name in the flow and type. To remove a step, click its trash can. Removing a step also removes its activities and the automation rules attached to them from your draft.

How candidates move between steps

Candidates stay in their current step until your team moves them with Change Step or an automation rule moves them (the job req’s Gate Steps setting, on by default).

Move candidates through steps

Change Step, bulk moves and what candidates see when they move.
Plan your steps around the decisions your team makes. A new step makes sense wherever you’d review candidates before letting them continue, for example between a quick screen and a longer assessment.

Add activities to a step

With your steps in place, fill each one with the activities candidates complete there. Every type of activity is a block in the building blocks column, and you add one by dragging it into a step.
1

Find the activity

Find it in the building blocks, or type in Search. Your saved screening question and interview templates are under Screening Questions and Interviews: click Templates to show them (the number is how many you have), or search by name and matching templates show on their own. Click the eye icon next to a template to preview its questions before you add it. Activities you can add lists every option.
2

Drag it into a step

Drag the block into the step, at the position where candidates should take it. An outlined slot shows where it will land.
The New Typing Test building block being dragged from the building blocks into the Screening step, where the highlighted outlined slot shows where it will land
3

Set it up

Click the activity to open its settings on the right. Change its name at the top, then finish its setup, such as its questions, instructions or the test to use. Each activity type’s guide covers the details.
The Customer Service Simulation activity selected in the Simulation step, with its settings highlighted on the right: its name at the top, Estimated Time (Minutes), Time Limit, the collapsed Instructions and Supporting Content sections marked Not added, and its questions with Add Question
Most activities have these settings:
  • Estimated Time (Minutes): how long the activity takes. Offers and onboarding forms don’t have one.
  • Time Limit (screening questions only): turn it On and candidates have only the estimated time to finish the whole activity; anything unanswered when time runs out is submitted as not answered.
  • Instructions: what candidates read before they start. Supporting Content (screening questions) is what they see while they answer, and interviews have Instructions for Interviewer. These sections start collapsed and show Added or Not added; click one to open it, and hover its info icon for a reminder of who sees it.
  • Questions (screening questions and interviews): click Add Question to pick from your question library or Create New Question. Drag questions to reorder them.
For an interview, open Interview Scheduler, then View and Edit Details to set up scheduling. A newly added interview needs to be saved in your draft first. See Set up an interview activity. To reorder activities, drag them by their grip within a step or into another step. To remove one, click its trash can. Candidates complete a step’s activities in the order listed, unless the job req allows them to take activities out of order. See Job settings.
Put quick, decisive activities first. Short screening questions before a longer assessment let candidates who aren’t a fit find out fast, and keep everyone else moving.

Save your changes

1

Check the version name

The title at the top is the version’s name. A new version is named for you from the last one (Workflow 2.0 becomes Workflow 3.0). Click it to rename it, like “Added typing test”. Each version on the job req needs a different name.
The top of the workflow editor with the title highlighted: the version name Workflow 3.0 with a pencil icon, and Workflow for Customer Care Associate with the job req's location and status underneath
2

Save the draft

Click Save Draft. Journeyfront saves your draft, confirms with a message, and you stay in the editor to keep working.
3

Publish when you're ready

Nothing changes for candidates until you publish. Click Publish; any unsaved changes are saved first. See Publish workflow changes.
To leave without saving, click Exit. If you have unsaved changes, Journeyfront asks whether to Save Draft or Discard them. To throw away a saved draft entirely, open the editor and click Delete Draft; this can’t be undone.

Get notified when an activity is completed

Each activity has a bell (Notify Users) on the Workflow page. Everyone on its list gets an email whenever a candidate completes that activity on this job req, so whoever reviews it, for example a skills test you check by hand, hears right away.
1

Open the Workflow page

Open the job req and go to Setup, then Workflow.
2

Click the bell

Click the bell (Notify Users) on the activity. The Get Notified window opens.
The Workflow page with the bell icon highlighted on the Phone Screen activity in the Recruiter Interview step, next to its eye and lightning bolt icons
3

Choose who's notified

Click Notify Me to add yourself, or Add User to search for someone else. Click the trash icon to take someone off the list. Changes save as you make them.
The Get Notified window for the Phone Screen activity on the Customer Care Associate job req, with the Notify Me and Add User buttons and two users listed by name and email, each with a trash icon
Notifications work best on activities your team acts on right away, like a final assessment or an interview. On a high-volume job req, a notification for every application adds up quickly.
To get an email when a candidate finishes their whole application instead, turn on Candidate completes application for yourself on the job req’s hiring team.

Hiring team

Who works on a job req, and the email when a candidate finishes applying.

Preview what candidates see

On the Workflow page, click the eye icon (Preview Activity) on an activity. The preview opens on that activity.
  • Use the Previewing menu to jump to any activity, or the arrows to move through them in order.
  • Switch between the mobile, tablet and desktop views to check each screen size.
  • Click Back to return to the Workflow page.
The activity preview for the Customer Care Agent job req on the mobile view, with the Previewing menu open listing each step's activities, the arrows and screen size, and the mobile, tablet and desktop buttons
The preview shows screening questions, behavioral assessments, interviews and typing tests the way candidates see them. Language assessments from partners show a message that they can’t be previewed, with a button to continue. Other activities, like offers and onboarding forms, don’t have a candidate preview. Nothing you enter in the preview is saved.
Before you start sending candidates to a new job req, preview it on the mobile view. Many high-volume candidates apply from a phone, so long instructions or wide tables are worth catching early.

FAQ

Yes. Your changes stay in a draft until you publish them as a new version. Candidates already in progress stay on the version they started with, so their interviews and offers aren’t affected. See Publish workflow changes.
The Setup tab needs the Manage Job Req Settings permission. Ask your Journeyfront admin to check your security role.
Check the title at the top: the version needs a name that no other version on the job req uses. A note under the title tells you if the name is taken. A System Requirements Test also needs a requirement set chosen before the draft can be saved.
If you haven’t saved yet, click Exit and choose Discard to throw away everything since your last save. Nothing reaches candidates until you publish, so the live version is never affected while you work.
Skills Tests lists the skills tests set up for your account. Ask your Customer Success Manager which skills tests are available for your roles. See Skills tests.
Your team moves them with Change Step, or an automation rule moves them when they meet the conditions you set. See Move candidates through steps and Automation rules.
It shows who completes each activity: the interviewer for interviews, and the candidate for the others. A step’s line shows everyone who completes its activities and their total estimated minutes.
No. The preview shows each activity as a candidate sees it, but nothing you enter is saved.
Yes, by duplicating the job req. The copy starts with the same steps, activities and automation rules, which you can then adjust. See Create a job req.

Activities you can add

Every activity type and where to set it up.

Publish workflow changes

Take your draft live, now or on a date you choose.

Automation rules

Move, message and route candidates automatically.

Job settings

Activity order, re-applying and other candidate experience settings.