> ## Documentation Index
> Fetch the complete documentation index at: https://help.journeyfront.com/llms.txt
> Use this file to discover all available pages before exploring further.

> ## Agent Instructions
> This is the Journeyfront Help Center for hiring teams. Journeyfront is an applicant tracking system (ATS). Use the Help Center's terms: job req, Candidate Profile (the person), Candidate Application (one person on one job req), hiring class. Link to the article you used in your answer.

# Fraud flags

> How Journeyfront flags applications that need a closer look, and what to do about them.

> [!NOTE]
>
> **Who can do this:** Everyone on a job req can see fraud flags. Admins with *Company Settings Access* choose which checks run in **Settings**, then **Fraud Detection**.
>
> **Availability:** Fraud detection needs to be turned on for your account. Ask your Customer Success Manager.

Remote, high-volume hiring attracts fraudulent applications. Journeyfront checks applications for warning signs automatically and gives each one a **fraud risk level**, so your team can spot the ones that need a closer look before they take up interview time.

## Risk levels

| Level | What it means | What to do |
| - | - | - |
| None | No warning signs found | Continue as normal |
| Low | Minor activity worth noting | Usually fine; glance at the details |
| Medium | Activity that may warrant review | Review before advancing |
| High | Strong warning signs | Review carefully before any next step |
| NA | Not enough information to set a risk level | Continue as normal |

## Where you'll see it

* **The Candidates page and a job req's Candidates tab:** add the **Fraud Risk Level** column with **Edit Columns**, or filter by **Fraud Risk Levels**.
* **The Candidate Application:** open the **Fraud** tab to see what was found.

![The Candidates page with the Fraud Risk Level column added, showing a None, Low, Medium, High or NA risk level for each candidate](https://mintcdn.com/journeyfront/61dBaB1hIRAsZpUl/images/candidates/fraud-flags/gen-fraud-risk-column.png?fit=max\&auto=format\&n=61dBaB1hIRAsZpUl\&q=85\&s=dfd60b3efd7576f19143bcd36d4135cf)

## Turn fraud checks on or off

Admins choose which checks run for your whole account.

**1. Open Fraud Detection**

Go to **Settings**, then **Fraud Detection**.

**2. Choose your Fraud Indicators**

Under **Network & Location**, switch each check on or off:

* **Location Change During Application**: whether the candidate's location changes while they work through the application.
* **IP Address Matches Other Candidates**: whether other candidates applied from the same network address.
* **VPN and Proxy Detection**: whether the candidate is hiding their location behind a VPN or another privacy service.

**3. Save**

Click **Save**. The button appears once you change a switch.

![Settings, then Fraud Detection: the Fraud Indicators list under Network & Location, with Location Change During Application, IP Address Matches Other Candidates and VPN and Proxy Detection switched on](https://mintcdn.com/journeyfront/Br-1VfSmmHqqnl8H/images/candidates/fraud-flags/fraud-settings.png?fit=max\&auto=format\&n=Br-1VfSmmHqqnl8H\&q=85\&s=4f50af7b0b1bb8d2037d1857759b6ba9)

If the page says fraud detection is not enabled for your account, ask your Customer Success Manager to turn it on. A change to the switches applies to activity from then on. Earlier activity isn't checked again, except that a new candidate on a shared network address can raise the shared-address level on the candidates who used it before.

## How the risk level is set

Each time a candidate applies, completes an activity, books an interview or submits an onboarding form, Journeyfront records the network address they used and its approximate location. When someone on your team schedules an interview for a candidate, your team member's network isn't recorded against the candidate.

Each check you've turned on looks at those records and gives itself a level:

| Check | What it looks for | How the level is set |
| - | - | - |
| **Location Change During Application** | The candidate's location moving between steps of the same application | The bigger the move, the higher the level. A different city is lower than a different state, and a different country is highest. |
| **IP Address Matches Other Candidates** | Other candidates in your account who applied from the same network address | The more other candidates share the address, the higher the level. |
| **VPN and Proxy Detection** | Signs the connection is anonymized, such as a VPN, a proxy or a hosting provider | Based on how strongly the connection looks anonymized. |

The application's **fraud risk level** is the highest level among its checks. One High check makes the application High, even if the other checks find nothing. Levels only go up as new activity is checked: a later clean step doesn't lower an earlier flag. A level can also rise after the fact: when a new candidate applies from an address an earlier candidate used, both applications are flagged.

Common, innocent reasons for a flag:

* **Shared networks.** Family members, roommates, a library, a college campus or your own hiring event's Wi-Fi can put several real candidates on one address.
* **Moving between networks.** A candidate who starts on a phone and finishes on home Wi-Fi can show a different city.
* **Work or privacy VPNs.** Some candidates apply from a work laptop or use a VPN by habit.

> [card] [Candidate Application](https://help.journeyfront.com/candidates/candidate-application.md)
>
> The slide-out panel where the Fraud tab and the risk level appear.

## Reviewing a flagged application

![A Candidate Application in the slide-out panel with numbered callouts: 1, the Fraud Risk - Medium chip in the header; 2, the Fraud tab; 3, the Medium level on IP Address Matches Other Candidates; 4, the Details table listing five other candidates who applied from the same IP address](https://mintcdn.com/journeyfront/Br-1VfSmmHqqnl8H/images/candidates/fraud-flags/fraud-tab.png?fit=max\&auto=format\&n=Br-1VfSmmHqqnl8H\&q=85\&s=8e17ab15cf4e2d5dd174354e59a534d3)

**1. Spot the risk level**

The candidate's level shows in the header of the Candidate Application (1), next to their status.

**2. Open the Fraud tab**

Click **Fraud** (2). **Fraud Indicators** lists each check with its own level (3). Click a check to see what was found.

**3. Read the details**

Each check shows an **Overview** and **Details** (4):

* **IP Address Matches Other Candidates:** the shared IP address, the **Number of other candidates**, the location and a table of those candidates with the job req they applied to. Click a job req to open that candidate's application. When the list is long, click **Export All** to download it.
* **Location Change During Application:** each location detected, with the activity and time it was recorded.
* **VPN and Proxy Detection:** the network provider and type, and what was detected.

Below the checks, the **Network & Location Log** lists every recorded activity with its IP address. Click **Get IP Details** on a row to look up its network and location.

**4. Look at the whole application**

Compare the flag with the candidate's answers, resume and contact details. Several candidates on one address who applied minutes apart, with similar answers, is a stronger sign than one household.

**5. Decide**

Advance, ask follow-up questions in the interview, or reject with a reason.

> [!TIP]
>
> Instead of rejecting High-risk applications automatically, use an automation rule (with the **Fraud Risk Level** condition) to move them to a review step. A reviewer clears the false alarms and you don't lose good candidates. Leave a comment with what you decided so the rest of your team knows it's been reviewed.

> [!WARNING]
>
> A risk level is a reason to review, not proof of fraud. Always look at the details before rejecting a candidate.

## FAQ

> [accordion] Can candidates see their fraud risk level?
>
> No. Fraud flags are only visible to your team.

> [accordion] Why don't some candidates have a risk level?
>
> Checks run as candidates apply and work through their activities, using the checks that are on at that moment. Earlier activity isn't checked again later, so a candidate who applied before fraud detection was turned on has no risk level until they do something new. One exception: when a new candidate applies from a network address other candidates already used, those earlier candidates' **IP Address Matches Other Candidates** level can go up too. A candidate shows NA when there isn't enough information to set a level.

> [accordion] Can I change the levels or the rules behind them?
>
> No. You choose which checks run in **Settings**, then **Fraud Detection**. How each check sets its level is the same for every account.

> [accordion] Why don't I see fraud flags at all?
>
> Fraud detection needs to be turned on for your account, and your admins choose which checks run. Ask your Customer Success Manager.

> [accordion] Does Journeyfront reject candidates for fraud on its own?
>
> No. Journeyfront flags applications for review. Your team, or automation rules your team sets up, decide what happens next.

## Related

> [card] [Automation rules](https://help.journeyfront.com/workflows/automation-rules.md)
>
> Move flagged applications to a review step automatically.

> [card] [How scoring works](https://help.journeyfront.com/scoring/how-scoring-works.md)
>
> What candidate scores mean.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.